English

Whois.SmartWeb.CZ

RFC 3395 - úplné znění

Plné znění RFC 3395:






Network Working Group                                         A. Bierman
Request for Comments: 3395                                      C. Bucci
Updates: 2895                                        Cisco Systems, Inc.
Category: Standards Track                                       R. Dietz
                                                              Hifn, Inc.
                                                                A. Warth
                                                          September 2002


 Remote Network Monitoring MIB Protocol Identifier Reference Extensions

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

Abstract

   This memo defines extensions to the Protocol Identifier Reference
   document for the identification of application verb information.  It
   updates the Protocol Identifier Reference document but does not
   obsolete any portion of that document.  In particular, it describes
   the algorithms required to identify protocol operations (verbs)
   within the protocol encapsulations managed with MIBs such as the
   Remote Network Monitoring MIB Version 2, RFC 2021.

Table of Contents

   1. The SNMP Network Management Framework ..........................2
   2. Overview .......................................................3
   2.1 Protocol Identifier Framework .................................3
   2.2 Protocol Identifier Extensions for Application Verbs ..........4
   2.3 Terms .........................................................4
   2.4 Relationship to the RMON-2 MIB ................................5
   2.5 Relationship to the RMON MIB Protocol Identifier Reference.....5
   3. Definitions ....................................................5
   3.1 Verb Identifier Macro Format ..................................5
   3.1.1 Lexical Conventions .........................................6
   3.1.2 Extended Grammar for the PI Language ........................6
   3.1.3 Mapping of the Parent Protocol Name .........................7
   3.1.4 Mapping of the DESCRIPTION Clause ...........................7



Bierman, et. al.            Standards Track                     [Page 1]

RFC 3395 RMON Verb Identifiers September 2002 3.1.5 Mapping of the REFERENCE Clause .............................7 3.1.6 Mapping of the Verb List Clause .............................7 3.1.6.1 Mapping of the Verb Name Field ............................8 3.1.6.2 Mapping of the Verb Enum Field ............................8 3.2 Protocol Directory Requirements ...............................8 3.2.1 Mapping of the Verb Layer Numbering Space ...................8 3.2.2 Mapping of the ProtocolDirID object .........................9 3.2.3 Mapping of the ProtocolDirParameters object .................9 3.2.4 Mapping of the ProtocolDirLocalIndex object ................10 3.2.5 Mapping of the protocolDirDescr object .....................10 3.2.6 Mapping of the protocolDirType object ......................10 3.2.7 Mapping of the protocolDirAddressMapConfig object ..........10 3.2.8 Mapping of the protocolDirHostConfig object ................10 3.2.9 Mapping of the protocolDirMatrixConfig object ..............10 3.2.10 Mapping of the protocolDirOwner object ....................11 3.2.11 Mapping of the protocolDirStatus object ...................11 4. Implementation Considerations .................................11 4.1 Stateful Protocol Decoding ...................................11 4.2 Packet Capture ...............................................11 4.3 RMON-2 MIB Collections .......................................12 5. Intellectual Property .........................................12 6. Acknowledgements ..............................................13 7. Normative References ..........................................13 8. Informative References ........................................14 9. IANA Considerations ...........................................15 10. Security Considerations ......................................15 Appendix A: Usage Examples .......................................16 A.1 FTP Example ..................................................16 A.2 POP3 Example .................................................17 A.3 SNMP Example .................................................18 A.4 HTTP Example .................................................18 A.5 SMTP Example .................................................19 Authors' Addresses ...............................................20 Full Copyright Statement..........................................21 1. The SNMP Network Management Framework The SNMP Management Framework presently consists of five major components: o An overall architecture, described in RFC 2571 [RFC 2571]. o Mechanisms for describing and naming objects and events for the purpose of management. The first version of this Structure of Management Information (SMI) is called SMIv1 and is described in STD 16, RFC 1155 [RFC 1155], STD 16, RFC 1212 [RFC 1212] and Bierman, et. al. Standards Track [Page 2]
RFC 3395 RMON Verb Identifiers September 2002 RFC 1215 [RFC 1215]. The second version, called SMIv2, is described in STD 58, RFC 2578 [RFC 2578], RFC 2579 [RFC 2579] and RFC 2580 [RFC 2580]. o Message protocols for transferring management information. The first version of the SNMP message protocol is called SNMPv1 and is described in STD 15, RFC 1157 [RFC 1157]. A second version of the SNMP message protocol, which is not an Internet standards track protocol, is called SNMPv2c and is described in RFC 1901 [RFC 1901] and RFC 1906 [RFC 1906]. The third version of the message protocol is called SNMPv3 and is described in RFC 1906 [RFC 1906], RFC 2572 [RFC 2572] and RFC 2574 [RFC 2574]. o Protocol operations for accessing management information. The first set of protocol operations and associated PDU formats is described in STD 15, RFC 1157 [RFC 1157]. A second set of protocol operations and associated PDU formats is described in RFC 1905 [RFC 1905]. o A set of fundamental applications is described in RFC 2573 [RFC 2573]. The view-based access control mechanism is described in RFC 2575 [RFC 2575]. A more detailed introduction to the current SNMP Management Framework can be found in RFC 2570 [RFC 2570]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI. This memo does not specify a MIB module. 2. Overview There is a need for a standardized way of identifying the protocol operations defined for particular application protocols. Different protocol operations can have very different performance characteristics, and it is desirable to collect certain metrics at this level of granularity. This memo defines extensions to the existing protocol identifier structure [RFC 2895] and is intended to update, not obsolete, the existing protocol identifier encoding rules. 2.1 Protocol Identifier Framework The RMON Protocol Identifier (PI) structure [RFC 2895] allows for a variable number of layer identifiers. Each layer contributes 4 octets to the protocolDirID OCTET STRING and one octet to the Bierman, et. al. Standards Track [Page 3]
RFC 3395 RMON Verb Identifiers September 2002 protocolDirParameters OCTET STRING. These two MIB objects comprise the index in the protocolDirTable [RFC 2021] and represent a globally unique identifier for a particular protocol encapsulation (or set of encapsulations if the wild-card base layer is used). 2.2 Protocol Identifier Extensions for Application Verbs The existing RMON protocol identifier architecture requires that an application verb be represented by one additional protocol layer, appended to the protocol identifier for the parent application. Since some application verbs are defined as strings which can exceed 4 octets in length, an integer mapping must be provided for each string. This memo specifies how the verb layer is structured, as well as a verb identifier macro syntax for specification of verb name to integer mappings. 2.3 Terms The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC 2119]. This document uses some terms defined in the RMON Protocol Identifier Reference document [RFC 2895] and some new terms that need introduction here. Application Verb Also called simply 'verb'. Refers to one of potentially many protocol operations that are defined by a particular application protocol. Note that an application verb is not equivalent to an application protocol sub-command or opcode within a packet containing a PDU for the application. An application verb is a transaction type and may involve several PDU types within the application protocol (e.g., SNMP Get-PDU and Response-PDU). In some applications, a verb may encompass protocol operations pertaining to more than one protocol entry in the protocol directory (e.g., ftp and ftp-data). Connect Verb The special application verb associated with connection or session setup and tear-down traffic, and not attributed to any other verb for the application. This verb is assigned the enumeration value of zero, and the verb 'connect(0)' is implicitly defined for all application protocols. Bierman, et. al. Standards Track [Page 4]
RFC 3395 RMON Verb Identifiers September 2002 Parent Application One of potentially many protocol encapsulations which identifies a particular application protocol. This term refers generically to any or all such encapsulations for a given set of application verbs. Verb Layer The portion of the protocol identifier octet string which identifies the application verb. Verb Set The group of verbs enumerated for a particular application protocol. The list of verb strings within a particular verb- identifier macro invocation is also called the verb set for that verb identifier. 2.4 Relationship to the RMON-2 MIB The RMON-2 MIB [RFC 2021] contains the protocolDirTable MIB objects used to identify all protocol encapsulations that can be monitored by a particular RMON agent. This memo describes how these MIB objects are mapped by an implementation for entries which identify application verbs. This document does not define any new MIB objects to identify application verbs. The applicability of the definitions in this document is not limited to the RMON-2 MIB. Other specifications which utilize the RMON-2 protocolDirTable and/or the protocol identifier macros which it represents can also utilize the application verb macro definitions contained in this document. 2.5 Relationship to the RMON MIB Protocol Identifier Reference The RMON MIB Protocol Identifier Reference [RFC 2895] defines the RMON Protocol Identifier Macro Specification Language as well as the encoding rules for the ProtocolDirID and protocolDirParameters OCTET STRINGs. This memo defines extensions to the Protocol Identifier Reference for the identification of application verb information. It does not obsolete any portion of the Protocol Identifier Reference document. 3. Definitions 3.1 Verb Identifier Macro Format The following example is meant to introduce the verb-identifier macro. This macro-like construct is used to represent protocol verbs for a specific parent application. Bierman, et. al. Standards Track [Page 5]
RFC 3395 RMON Verb Identifiers September 2002 3.1.1 Lexical Conventions The following keyword is added to the PI language: VERB-IDENTIFIER 3.1.2 Extended Grammar for the PI Language The following is the extended BNF notation for the grammar with starting symbol <piFile>. It is for representing verb identifier macros. Note that only the term <piFile> is actually modified from the definition in [RFC 2895]. The <piDefinition> syntax is not reproduced here, since this memo is intended to extend that definition, not replace it. -- a file containing one or more -- Protocol Identifier (PI) definitions <piFile> = [ <piDefinition> | <piVerbDefinition> ]... -- a PI definition <piVerbDefinition> = [<wspace>] <parentProtoName> <wspace> "VERB-IDENTIFIER" <wspace> "DESCRIPTION" <wspace> string [ <wspace> "REFERENCE" <wspace> string ] [<wspace>] "::=" [<wspace>] "{" [<wspace>] <verbList> [<wspace>] "}" [<wspace>] -- a list of verb identifier string <verbList> = <verbId> [ [<wspace>] "," [<wspace>] <verbId> ]... -- a verb identifier string <verbId> = <verbName> [<wspace>] "(" [<wspace>] <verbEnum> [<wspace>] ")" [<wspace>] -- a protocol name <parentProtoName> = <protoName> -- a verb name <verbName> = <lcname> -- a verb enumeration <verbEnum> = <posNum> -- a positive integer <posNum> = any integer value greater than zero and less than 16,777,216 -- <piDefinition> syntax is defined in [RFC 2895] Bierman, et. al. Standards Track [Page 6]
RFC 3395 RMON Verb Identifiers September 2002 -- <protoName> syntax is defined in [RFC 2895] -- <wspace> syntax is defined in [RFC 2895] -- <lcname> syntax is defined in [RFC 2895] 3.1.3 Mapping of the Parent Protocol Name The "parentProtoName" value, called the "parent protocol name", SHOULD be an ASCII string consisting of 1 to 64 characters. (These names are intended to appear in IETF documentation, so the use of UTF-8 is not appropriate.) The encoding rules are exactly as specified in section 6.2.4 of [RFC 2895] for the mapping of the protocol name field. The value for <parentProtoName> (which is called the "parent protocol name") MUST be the value of a protocol identifier defined as specified for <protoName> in section 3.2.4 of [RFC 2895]. The value of <parentProtoName> MUST specify a <protoName> defined in the <piFile>. A protocol identifier macro SHOULD exist in the <piFile> for at least one encapsulation of the parent application protocol if any verb identifier macros referencing that parent application are present in the <piFile>. 3.1.4 Mapping of the DESCRIPTION Clause The DESCRIPTION clause provides a textual description of the protocol verb set identified by this macro. It SHOULD NOT contain details about items covered by the REFERENCE clause. The DESCRIPTION clause MUST be present in all verb-identifier macro declarations. 3.1.5 Mapping of the REFERENCE Clause If a publicly available reference document exists for this set of application protocol verbs, it SHOULD be listed here. Typically this will be a URL, otherwise it will be the name and address of the controlling body. The REFERENCE clause is optional but SHOULD be present if an authoritative reference exists which specifies the application protocol verbs defined in the <verbList> section of this macro. 3.1.6 Mapping of the Verb List Clause The verb list clause MUST be present. It is used to identify a list of application verb names and associate a numeric constant with each verb name. At least one verb MUST be specified and a maximum of 16,777,215 (2^^24 - 1) verbs MAY be specified. This enumerated list SHOULD be densely numbered (i.e., valued from '1' to 'N', where 'N' is the total number of verbs defined in the macro). Bierman, et. al. Standards Track [Page 7]
RFC 3395 RMON Verb Identifiers September 2002 3.1.6.1 Mapping of the Verb Name Field The <verbName> field is case-sensitive and SHOULD be set to the most appropriate string name for each application verb. If such a descriptive string is defined in an authoritative document then that string SHOULD be used. If no such string exists then an appropriate but arbitrary string should be selected for this value. Verb names MUST be unique for a particular parent application. Note that the special 'connect(0)' verb is implicitly defined for each application protocol. It is possible for an explicit definition of this verb (e.g., 'connect(8)' for http) to exist for a protocol, as well as the implicit 'connect(0)' verb. 3.1.6.2 Mapping of the Verb Enum Field The <verbEnum> field MUST be unique for all verbs associated with a particular parent application. This field SHOULD contain a value between '1' and '16,777,215' inclusive. 3.2 Protocol Directory Requirements This section defines how the protocolDirTable should be populated for any application verb identified with a verb-identifier macro. An agent MUST implement all applicable protocolDirTable MIB objects on behalf of each supported application verb. 3.2.1 Mapping of the Verb Layer Numbering Space The verb layer consists of the 4 octets within the protocolDirID INDEX field which identify a particular application verb. Figure 1 Verb Layer Format ----------------- protocolDirID string fragment ---+--------+--------+--------+--------+ | resrvd | | .. | set to | verb enumeration value | | zero | (a) (b) (c) | ---+--------+--------+--------+--------+ octet | 1 | 3 | count The first octet is reserved for future use and MUST be set to zero. Bierman, et. al. Standards Track [Page 8]
RFC 3395 RMON Verb Identifiers September 2002 The next three octets identify the <verbEnum> field used to enumerate the particular application verb represented by the <verbName> field. This field is a 24-bit unsigned integer, encoded in network byte order. The value zero is reserved to identify the special 'connect(0)' verb. This verb enumeration value (i.e., '0' part of 'connect(0)') MUST NOT be redefined in a verb identifier macro verb list. Note that the verb name 'connect' is not reserved and MAY be redefined in a verb list. 3.2.2 Mapping of the ProtocolDirID object The protocolDirID OCTET STRING value for a particular application verb is represented by the protocolDirID value for the parent application, appended with the verb's layer identifier value. Figure 2 ProtocolDirID Format for Verbs ------------------------------ protocolDirID string +--------+--------+--------+--------+ | parent | verb | | protocolDirID | layer | | string | value | +--------+--------+--------+--------+ octet | length of parent ID | 4 | count The protocolDirID object is encoded as the protocolDirID value of the parent application, followed by four additional octets representing the verb layer. The verb layer value is encoded as [0.a.b.c] where 'a' is the high order byte, 'b' is the middle order byte, and 'c' is the low order byte of the <verbEnum> field for the specific application verb value. A valid PI verb enumeration will be encoded in the range "0.0.0.0" to "0.255.255.255", where the special value "0.0.0.0" is reserved for the implicitly defined 'connect(0)' verb. 3.2.3 Mapping of the ProtocolDirParameters object The protocolDirParameters OCTET STRING value for a particular application verb is represented by the protocolDirParameters value for the parent application, appended with one octet containing the value zero. Although not actually used, this field is included to conform to the encoding rules defined in the Protocol Identifiers Reference [RFC 2895]. Bierman, et. al. Standards Track [Page 9]
RFC 3395 RMON Verb Identifiers September 2002 3.2.4 Mapping of the ProtocolDirLocalIndex object The agent MUST assign an appropriate protocolDirLocalIndex value for each application verb according to the encoding rules defined for this object in [RFC 2021] and [RFC 2895]. 3.2.5 Mapping of the protocolDirDescr object The agent MUST convey the <verbName> value for a particular application verb in the protocolDirDescr object. This object SHOULD be encoded as the protocolDirDescr value for the parent application appended with a 'dot' character, followed by the exact text contained in the <verbName> field. 3.2.6 Mapping of the protocolDirType object The agent MUST set the protocolDirType object for each application verb to the value representing the empty bit set ( {} ). 3.2.7 Mapping of the protocolDirAddressMapConfig object The agent MUST set the protocolDirAddressMapConfig object for each application verb to the value 'notSupported(1)'. 3.2.8 Mapping of the protocolDirHostConfig object The agent MUST set the protocolDirHostConfig object for each application verb present in the protocol directory according to the monitoring capabilities for each verb. The agent MAY set this object to the same value as configured in the parent application protocolDirHostConfig object. The agent MAY choose to transition this object from the value 'supportedOn(2)' to 'supportedOff(3)' if the parent application protocolDirHostConfig object first transitions from 'supportedOn(2)' to 'supportedOff(3)'. 3.2.9 Mapping of the protocolDirMatrixConfig object The agent MUST set the protocolDirMatrixConfig object for each application verb according to the monitoring capabilities for each verb. The agent MAY set this object to the same value as configured in the parent application protocolDirMatrixConfig object. The agent MAY choose to transition this object from the value 'supportedOn(2)' to 'supportedOff(3)' if the parent application protocolDirMatrixConfig object first transitions from 'supportedOn(2)' to 'supportedOff(3)'. Bierman, et. al. Standards Track [Page 10]
RFC 3395 RMON Verb Identifiers September 2002 3.2.10 Mapping of the protocolDirOwner object This object is encoded exactly the same for application verbs as for other protocolDirTable entries, according to the rules specified in the RMON-2 MIB [RFC 2021]. 3.2.11 Mapping of the protocolDirStatus object This object is encoded exactly the same for application verbs as for other protocolDirTable entries, according to the rules specified in RMON-2 MIB [RFC 2021]. 4. Implementation Considerations This section discusses the implementation implications for agents which support verbs in the protocol directory and the RMON collections which utilize the protocol directory. 4.1 Stateful Protocol Decoding Implementations of the RMON-2 MIB for application layer and network layer protocols typically require little if any state to be maintained by the probe. The probe can generally decide whether to count a packet and its octets on the packet's own merits, without referencing or updating any state information. Implementations of the RMON-2 MIB at the verb layer will, for many protocols, need to maintain state information in order to correctly classify a packet as "belonging" to one verb or another. The examples below illustrate this point. For SNMP over UDP, a Response-PDU for an SNMP Get-PDU can't be distinguished from a Response-PDU for a Getnext-PDU. A probe would need to maintain state information in order to correlate a Response- PDU from B to A with a previous request from A to B. For application protocols carried over a stream-based transport such as TCP, the information required to identify an application verb can span several packets. A probe would need to follow the transport- layer flow in order to correctly parse the application-layer data. 4.2 Packet Capture For packet capture based on verb-layer protocol directory filtering, the decision to include a packet in the capture buffer may need to be deferred until the packet can be conclusively attributed to a Bierman, et. al. Standards Track [Page 11]
RFC 3395 RMON Verb Identifiers September 2002 particular verb. A probe may need to pre-buffer packets while deciding to include or exclude them from capture based on other packets that have not yet arrived. 4.3 RMON-2 MIB Collections Data collections such as the protocol distribution or Application Layer Host Table (alHostTable) require that each packet is counted only once, i.e., a given packet is fully classified as a single protocol encapsulation which resolves to a single leaf entry in the protocol directory. Also, octet counters related to protocol classification are incremented by the entire size of packet, not just the octets associated with a particular encapsulation layer. It is possible that particular application protocols will allow multiple types of verbs to be present in a single packet. In this case, the agent MUST choose one verb type, and therefore one protocol directory entry, in order to properly count such a packet. It is an implementation-specific matter as to which verb type an agent selects to identify a packet in the event more than one verb type is present in that packet. Some possible choices include: - the first verb type encountered in the packet - the verb type with the most instances in the packet - the verb type using the largest number of octets in the packet - the most 'interesting' verb type in the packet (based on knowledge of that application protocol). 5. Intellectual Property The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementors or users of this specification can be obtained from the IETF Secretariat. Bierman, et. al. Standards Track [Page 12]
RFC 3395 RMON Verb Identifiers September 2002 The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director. 6. Acknowledgements This memo is a product of the RMONMIB WG. 7. Normative References [RFC 1905] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996. [RFC 1906] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996. [RFC 2021] Waldbusser, S., "Remote Network Monitoring MIB (RMON-2)", RFC 2021, January 1997. [RFC 2026] Bradner, S., "The Internet Standards Process -- Revision 3", BCP 9, RFC 2026, October 1996. [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC 2571] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2571, April 1999. [RFC 2572] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2572, April 1999. [RFC 2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3 Applications", RFC 2573, April 1999. [RFC 2574] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2574, April 1999. Bierman, et. al. Standards Track [Page 13]
RFC 3395 RMON Verb Identifiers September 2002 [RFC 2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", RFC 2575, April 1999. [RFC 2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC 2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC 2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC 2895] Bierman, A., Bucci, C. and R. Iddon, "Remote Network Monitoring MIB Protocol Identifiers", RFC 2895, August 2000. 8. Informative References [RFC 1155] Rose, M. and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based Internets", STD 16, RFC 1155, May 1990. [RFC 1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple Network Management Protocol", STD 15, RFC 1157, May 1990. [RFC 1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD 16, RFC 1212, March 1991. [RFC 1215] Rose, M., "A Convention for Defining Traps for use with the SNMP", RFC 1215, March 1991. [RFC 1901] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, January 1996. [RFC 2570] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction to Version 3 of the Internet-standard Network Management Framework", RFC 2570, April 1999. Bierman, et. al. Standards Track [Page 14]
RFC 3395 RMON Verb Identifiers September 2002 9. IANA Considerations At this time there are no application protocol verbs defined that require IANA registration, similar to the 'ianaAssigned' protocol identifiers found in RFC 2895. It is remotely possible that a future version of this document will contain application verb definitions which require assignment in the 'ianaAssigned' protocol identifier subtree. 10. Security Considerations This memo defines the structure of a portion of the Remote Monitoring MIB framework, but does not define any MIB objects or protocol operations. Instead, it defines algorithms for representing application protocol verbs in RMON Protocol Identifiers. It does not introduce any new security risks into a managed system. However, if an MIB collection is designed which utilizes this type of Protocol Identifier, then such a collection may expose which verbs in an application protocol are used in a network. Inclusion of this additional information may require more consideration for protection. MIB writers should address such considerations. Bierman, et. al. Standards Track [Page 15]
RFC 3395 RMON Verb Identifiers September 2002 Appendix A: Usage Examples The following examples are listed to demonstrate how RMON verb identifiers are declared. A.1 FTP Example This example defines verb enumeration values for the File Transfer Protocol as defined in RFC 959 and updated by RFC 2228 and RFC 2640. Note that verb name strings specified in the <verbName> field are not limited to 4 characters in length. In the FTP protocol, all the command names are 4 characters in length and the verb name string should match the official command name as closely as possible. ftp VERB-IDENTIFIER DESCRIPTION "The set of verbs for FTP is derived from the list of commands defined for the File Transfer Protocol, which are identified by case-insensitive strings. The commands are simply listed in the order found in the FTP documentation." REFERENCE "File Transfer Protocol, RFC 959, Section 4.1; FTP Security Extensions, RFC 2228, Section 3; Internationalization of the File Transfer Protocol, RFC 2640, Section 4.1." ::= { user(1), -- USER NAME pass(2), -- PASSWORD acct(3), -- ACCOUNT cwd(4), -- CHANGE WORKING DIRECTORY cdup(5), -- CHANGE TO PARENT DIRECTORY smnt(6), -- STRUCTURE MOUNT rein(7), -- REINITIALIZE quit(8), -- LOGOUT port(9), -- DATA PORT pasv(10), -- PASSIVE type(11), -- REPRESENTATION TYPE stru(12), -- FILE STRUCTURE mode(13), -- TRANSFER MODE retr(14), -- RETRIEVE stor(15), -- STORE stou(16), -- STORE UNIQUE appe(17), -- APPEND (with create) allo(18), -- ALLOCATE rest(19), -- RESTART rnfr(20), -- RENAME FROM rnto(21), -- RENAME TO Bierman, et. al. Standards Track [Page 16]
RFC 3395 RMON Verb Identifiers September 2002 abor(22), -- ABORT dele(23), -- DELETE rmd(24), -- REMOVE DIRECTORY mkd(25), -- MAKE DIRECTORY pwd(26), -- PRINT WORKING DIRECTORY list(27), -- LIST nlst(28), -- NAME LIST site(29), -- SITE PARAMETERS syst(30), -- SYSTEM stat(31), -- STATUS help(32), -- HELP noop(33), -- NOOP auth(34), -- AUTHENTICATION/SECURITY MECHANISM adat(35), -- AUTHENTICATION/SECURITY DATA pbsz(36), -- PROTECTION BUFFER SIZE prot(37), -- DATA CHANNEL PROTECTION LEVEL ccc(38), -- CLEAR COMMAND CHANNEL mic(39), -- INTEGRITY PROTECTED COMMAND conf(40), -- CONFIDENTIALITY PROTECTED COMMAND enc(41), -- PRIVACY PROTECTED COMMAND lang(42) -- LANGUAGE } A.2 POP3 Example This example defines verb enumeration values for the Post Office Protocol, Version 3, as defined in RFC 1939 and updated by RFC 2449. pop3 VERB-IDENTIFIER DESCRIPTION "The set of verbs for POP3 is derived from the list of commands defined for the Post Office Protocol, which are identified by case-insensitive strings. The commands are simply listed in the order found in the POP3 command summary." REFERENCE "Post Office Protocol, Version 3, RFC 1939, Section 9; POP3 Extension Mechanism, RFC 2449, Section 5." ::= { user(1), pass(2), quit(3), stat(4), list(5), retr(6), dele(7), noop(8), rset(9), Bierman, et. al. Standards Track [Page 17]
RFC 3395 RMON Verb Identifiers September 2002 apop(10), top(11), uidl(12), capa(13) } A.3 SNMP Example This example defines verb enumeration values for the Simple Network Management Protocol, as defined in RFC 1905. snmp VERB-IDENTIFIER DESCRIPTION "The set of verbs for SNMP is derived from the list of PDU transaction types in the Protocol Operations document for SNMPv2. Note that the 'Response' and 'Report' PDUs are not considered verbs, but are classified as belonging to the transaction type associated with the request PDU." REFERENCE "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2), RFC 1905, Section 3." ::= { get(1), get-next(2), get-bulk(3), set(4), inform-request(5), trap(6) } A.4 HTTP Example This example defines verb enumeration values for the Hypertext Transfer Protocol, version 1.1, as defined in RFC 2616. http VERB-IDENTIFIER DESCRIPTION "The set of verbs for HTTP is derived from the list of methods defined for the Hypertext Transfer Protocol, which are identified by case-sensitive strings. The commands are simply listed in the order found in the HTTP/1.1 documentation. Methods commonly used in HTTP/1.0 are a proper subset of those used in HTTP/1.1. Both versions of the protocol are in current use." REFERENCE "Hypertext Transfer Protocol -- HTTP/1.1, RFC 2616, Bierman, et. al. Standards Track [Page 18]
RFC 3395 RMON Verb Identifiers September 2002 Section 9; Hypertext Transfer Protocol -- HTTP/1.0, RFC 1945, Section 8." ::= { options(1), get(2), head(3), post(4), put(5), delete(6), trace(7), connect(8) -- reserved for future use by HTTP/1.1 } A.5 SMTP Example This example defines verb enumeration values for the Simple Mail Transfer Protocol as defined in RFC 2821. smtp VERB-IDENTIFIER DESCRIPTION "The set of verbs for SMTP is derived from the set of commands defined for the protocol. These commands are identified by case-insensitive strings. Commands are listed in the order found in RFC 2821. The special "xcmd" verb is defined here as a catch-all for private-use commands, which must start with the letter 'X'." REFERENCE "Simple Mail Transfer Protocol -- RFC 2821, sections 4.1.1 and 4.1.5." ::= { ehlo(1), -- Extended HELLO (4.1.1.1) helo(2), -- HELLO (4.1.1.1) mail(3), -- MAIL (4.1.1.2) rcpt(4), -- RECIPIENT (4.1.1.3) data(5), -- DATA (4.1.1.4) rset(6), -- RESET (4.1.1.5) vrfy(7), -- VERIFY (4.1.1.6) expn(8), -- EXPAND (4.1.1.7) help(9), -- HELP (4.1.1.8) noop(10), -- NOOP (4.1.1.9) quit(11), -- QUIT (4.1.1.10) xcmd(12) -- Catch-all for private-use "X" commands (4.1.5) } Bierman, et. al. Standards Track [Page 19]
RFC 3395 RMON Verb Identifiers September 2002 Authors' Addresses Andy Bierman Cisco Systems, Inc. 170 West Tasman Dr San Jose, CA USA 95134 Phone: +1 408-527-3711 EMail: abierman@cisco.com Chris Bucci Cisco Systems, Inc. 170 West Tasman Dr San Jose, CA USA 95134 Phone: +1 408-527-5337 EMail: cbucci@cisco.com Russell Dietz Hifn, Inc. 750 University Ave Los Gatos, CA, USA 95032-7695 Phone: +1 408-399-3623 EMail: rdietz@hifn.com Albin Warth EMail: dahoss@earthlink.net Bierman, et. al. Standards Track [Page 20]
RFC 3395 RMON Verb Identifiers September 2002 Full Copyright Statement Copyright (C) The Internet Society (2002). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Bierman, et. al. Standards Track [Page 21]


English version: RFC 3395