Internet Engineering Task Force (IETF) B. Gondwana, Ed.
Request for Comments: 8474 FastMail
Updates: 3501 September 2018
Category: Standards Track
ISSN: 2070-1721
IMAP Extension for Object Identifiers
Abstract
This document updates RFC 3501 (IMAP4rev1) with persistent
identifiers on mailboxes and messages to allow clients to more
efficiently reuse cached data when resources have changed location on
the server.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/RFC 8474.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Gondwana Standards Track [Page 1]
RFC 8474 IMAP ObjectID September 2018
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions Used in This Document . . . . . . . . . . . . . . 3
3. CAPABILITY Identification . . . . . . . . . . . . . . . . . . 3
4. MAILBOXID Object Identifier . . . . . . . . . . . . . . . . . 3
4.1. New Response Code for CREATE . . . . . . . . . . . . . . 4
4.2. New OK Untagged Response for SELECT and EXAMINE . . . . . 4
4.3. New Attribute for STATUS . . . . . . . . . . . . . . . . 5
5. EMAILID Object Identifier and THREADID Correlator . . . . . . 6
5.1. EMAILID Identifier for Identical Messages . . . . . . . . 6
5.2. THREADID Identifier for Related Messages . . . . . . . . 6
5.3. New Message Data Items in FETCH and UID FETCH Commands . 7
6. New Filters on SEARCH Command . . . . . . . . . . . . . . . . 9
7. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 9
8. Implementation Considerations . . . . . . . . . . . . . . . . 10
8.1. Assigning Object Identifiers . . . . . . . . . . . . . . 10
8.2. Interaction with Special Cases . . . . . . . . . . . . . 11
8.3. Client Usage . . . . . . . . . . . . . . . . . . . . . . 11
8.4. Advice to Client Implementers . . . . . . . . . . . . . . 12
9. Future Considerations . . . . . . . . . . . . . . . . . . . . 12
10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 12
11. Security Considerations . . . . . . . . . . . . . . . . . . . 13
12. References . . . . . . . . . . . . . . . . . . . . . . . . . 13
12.1. Normative References . . . . . . . . . . . . . . . . . . 13
12.2. Informative References . . . . . . . . . . . . . . . . . 14
Appendix A. Ideas for Implementing Object Identifiers . . . . . 15
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 15
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 16
1. Introduction
IMAP stores are often used by many clients. Each client may cache
data from the server so that it doesn't need to redownload
information. [RFC 3501] states that a mailbox can be uniquely
referenced by its name and UIDVALIDITY, and a message within that
mailbox can be uniquely referenced by its mailbox (name +
UIDVALIDITY) and unique identifier (UID). The triple of mailbox
name, UIDVALIDITY, and UID is guaranteed to be immutable.
[RFC 4315] defines a COPYUID response that allows a client that copies
messages to know the mapping between the UIDs in the source and
destination mailboxes and, hence, update its local cache.
If a mailbox is successfully renamed by a client, that client will
know that the same messages exist in the destination mailbox name as
previously existed in the source mailbox name.
Gondwana Standards Track [Page 2]
RFC 8474 IMAP ObjectID September 2018
The result is that the client that copies (or moves [RFC 6851])
messages or renames a mailbox can update its local cache, but any
other client connected to the same store cannot know with certainty
that the messages are identical, so it will redownload everything.
This extension adds new properties to a message (EMAILID) and mailbox
(MAILBOXID). These properties allow a client to quickly identify
messages or mailboxes that have been renamed by another client.
This extension also adds an optional thread identifier (THREADID) to
messages, which can be used by the server to indicate messages that
it has identified to be related. A server that does not implement
threading will return NIL to all requests for THREADID.
2. Conventions Used in This Document
In examples, "C:" indicates lines sent by a client that is connected
to a server. "S:" indicates lines sent by the server to the client.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC 2119] [RFC 8174] when, and only when, they appear in all
capitals, as shown here.
3. CAPABILITY Identification
IMAP servers that support this extension MUST include "OBJECTID" in
the response list to the CAPABILITY command.
4. MAILBOXID Object Identifier
The MAILBOXID is a server-allocated unique identifier for each
mailbox.
The server MUST return the same MAILBOXID for a mailbox with the same
name and UIDVALIDITY.
The server MUST NOT report the same MAILBOXID for two mailboxes at
the same time.
The server MUST NOT reuse the same MAILBOXID for a mailbox that does
not obey all the invariants that [RFC 3501] defines for a mailbox that
does not change name or UIDVALIDITY.
Gondwana Standards Track [Page 3]
RFC 8474 IMAP ObjectID September 2018
The server MUST keep the same MAILBOXID for the source and
destination when renaming a mailbox in a way that keeps the same
messages (but see [RFC 3501] for the special case regarding the
renaming of INBOX, which is treated as creating a new mailbox and
moving the messages).
4.1. New Response Code for CREATE
This document extends the CREATE command to have the response code
MAILBOXID on successful mailbox creation.
A server advertising the OBJECTID capability MUST include the
MAILBOXID response code in the tagged OK response to all successful
CREATE commands.
Syntax: "MAILBOXID" SP "(" objectid ")"
Response code in tagged OK response for successful CREATE command.
Example:
C: 3 create foo
S: 3 OK [MAILBOXID (F2212ea87-6097-4256-9d51-71338625)] Completed
C: 4 create bar
S: 4 OK [MAILBOXID (F6352ae03-b7f5-463c-896f-d8b48ee3)] Completed
C: 5 create foo
S: 5 NO Mailbox already exists
4.2. New OK Untagged Response for SELECT and EXAMINE
This document adds a new untagged response code to the SELECT and
EXAMINE commands.
A server advertising the OBJECTID capability MUST return an untagged
OK response with the MAILBOXID response code on all successful SELECT
and EXAMINE commands.
Syntax: "OK" SP "[" "MAILBOXID" SP "(" objectid ")" "]" SP text
Untagged OK response to SELECT or EXAMINE.
Example:
C: 27 select "foo"
[...]
S: * OK [MAILBOXID (F2212ea87-6097-4256-9d51-71338625)] Ok
[...]
S: 27 OK [READ-WRITE] Completed
Gondwana Standards Track [Page 4]
RFC 8474 IMAP ObjectID September 2018
4.3. New Attribute for STATUS
This document adds the MAILBOXID attribute to the STATUS command
using the extended syntax defined in [RFC 4466].
A server that advertises the OBJECTID capability MUST support the
MAILBOXID status attribute.
Syntax: "MAILBOXID"
The attribute in the STATUS command.
Syntax: "MAILBOXID" SP "(" objectid ")"
The response item in the STATUS response contains the ObjectID
assigned by the server for this mailbox.
Example:
C: 6 status foo (mailboxid)
S: * STATUS foo (MAILBOXID (F2212ea87-6097-4256-9d51-71338625))
S: 6 OK Completed
C: 7 status bar (mailboxid)
S: * STATUS bar (MAILBOXID (F6352ae03-b7f5-463c-896f-d8b48ee3))
S: 7 OK Completed
C: 8 rename foo renamed
S: * OK rename foo renamed
S: 8 OK Completed
C: 9 status renamed (mailboxid)
S: * STATUS renamed (MAILBOXID (F2212ea87-6097-4256-9d51-71338625))
S: 9 OK Completed
C: 10 status bar (mailboxid)
S: * STATUS bar (MAILBOXID (F6352ae03-b7f5-463c-896f-d8b48ee3))
S: 10 OK Completed
When the LIST-STATUS IMAP capability defined in [RFC 5819] is also
available, the STATUS command can be combined with the LIST command.
Example:
C: 11 list "" "*" return (status (mailboxid))
S: * LIST (\HasNoChildren) "." INBOX
S: * STATUS INBOX (MAILBOXID (Ff8e3ead4-9389-4aff-adb1-d8d89efd8cbf))
S: * LIST (\HasNoChildren) "." bar
S: * STATUS bar (MAILBOXID (F6352ae03-b7f5-463c-896f-d8b48ee3))
S: * LIST (\HasNoChildren) "." renamed
S: * STATUS renamed (MAILBOXID (F2212ea87-6097-4256-9d51-71338625))
S: 11 OK Completed (0.001 secs 3 calls)
Gondwana Standards Track [Page 5]
RFC 8474 IMAP ObjectID September 2018
5. EMAILID Object Identifier and THREADID Correlator
5.1. EMAILID Identifier for Identical Messages
The EMAILID data item is an ObjectID that uniquely identifies the
content of a single message. Anything that must remain immutable on
a {name, uidvalidity, uid} triple must also be the same between
messages with the same EMAILID.
The server MUST return the same EMAILID for the same triple; hence,
EMAILID is immutable.
The server MUST return the same EMAILID as the source message for the
matching destination message in the COPYUID pairing after a COPY or
MOVE command [RFC 6851].
The server MAY assign the same EMAILID as an existing message upon
APPEND (e.g., if it detects that the new message has exactly
identical content to that of an existing message).
NOTE: EMAILID only identifies the immutable content of the message.
In particular, it is possible for different messages with the same
EMAILID to have different keywords. This document does not specify a
way to STORE by EMAILID.
5.2. THREADID Identifier for Related Messages
The THREADID data item is an ObjectID that uniquely identifies a set
of messages that the server believes should be grouped together when
presented.
THREADID calculation is generally based on some combination of
References, In-Reply-To, and Subject, but the exact logic is left up
to the server implementation. [RFC 5256] describes some algorithms
that could be used; however, this specification does not mandate any
particular strategy.
The server MUST return the same THREADID for all messages with the
same EMAILID.
The server SHOULD return the same THREADID for related messages, even
if they are in different mailboxes; for example, messages that would
appear in the same thread if they were in the same mailbox SHOULD
have the same THREADID, even if they are in different mailboxes.
The server MUST NOT change the THREADID of a message once reported.
Gondwana Standards Track [Page 6]
RFC 8474 IMAP ObjectID September 2018
THREADID is OPTIONAL; if the server doesn't support THREADID or is
unable to calculate relationships between messages, it MUST return
NIL to all FETCH responses for the THREADID data item, and a SEARCH
for THREADID MUST NOT match any messages.
The server MUST NOT use the same ObjectID value for both EMAILIDs and
THREADIDs. If they are stored with the same value internally, the
server can generate prefixed values (as shown in the examples below
with M and T prefixes) to avoid clashes.
5.3. New Message Data Items in FETCH and UID FETCH Commands
This document defines two FETCH items:
Syntax: "EMAILID"
The EMAILID message data item causes the server to return EMAILID
FETCH response data items.
Syntax: "THREADID"
The THREADID message data item causes the server to return THREADID
FETCH response data items.
This document defines the following responses:
Syntax: "EMAILID" SP "(" objectid ")"
The EMAILID response data item contains the server-assigned ObjectID
for each message.
Syntax: "THREADID" SP "(" objectid ")"
The THREADID response data item contains the server-assigned ObjectID
for the set of related messages to which this message belongs.
Syntax: "THREADID" SP nil
The NIL value is returned for the THREADID response data item when
the server mailbox does not support THREADID calculation.
Gondwana Standards Track [Page 7]
RFC 8474 IMAP ObjectID September 2018
Example:
C: 5 append inbox "20-Mar-2018 03:07:37 +1100" {733}
[...]
Subject: Message A
Message-ID: <fake.1521475657.54797@example.com>
[...]
S: 5 OK [APPENDUID 1521475658 1] Completed
C: 11 append inbox "20-Mar-2018 03:07:37 +1100" {793}
[...]
Subject: Re: Message A
Message-ID: <fake.1521475657.21213@example.org>
References: <fake.1521475657.54797@example.com>
[...]
S: 11 OK [APPENDUID 1521475658 2] Completed
C: 17 append inbox "20-Mar-2018 03:07:37 +1100" {736}
[...]
Subject: Message C
Message-ID: <fake.1521475657.60280@example.com>
[...]
S: 17 OK [APPENDUID 1521475658 3] Completed
C: 22 fetch 1:* (emailid threadid)
S: * 1 FETCH (EMAILID (M6d99ac3275bb4e) THREADID (T64b478a75b7ea9))
S: * 2 FETCH (EMAILID (M288836c4c7a762) THREADID (T64b478a75b7ea9))
S: * 3 FETCH (EMAILID (M5fdc09b49ea703) THREADID (T11863d02dd95b5))
S: 22 OK Completed (0.000 sec)
C: 23 move 2 foo
S: * OK [COPYUID 1521475659 2 1] Completed
S: * 2 EXPUNGE
S: 23 OK Completed
C: 24 fetch 1:* (emailid threadid)
S: * 1 FETCH (EMAILID (M6d99ac3275bb4e) THREADID (T64b478a75b7ea9))
S: * 2 FETCH (EMAILID (M5fdc09b49ea703) THREADID (T11863d02dd95b5))
S: 24 OK Completed (0.000 sec)
C: 25 select "foo"
C: 25 select "foo"
[...]
S: 25 OK [READ-WRITE] Completed
C: 26 fetch 1:* (emailid threadid)
S: * 1 FETCH (EMAILID (M288836c4c7a762) THREADID (T64b478a75b7ea9))
S: 26 OK Completed (0.000 sec)
Gondwana Standards Track [Page 8]
RFC 8474 IMAP ObjectID September 2018
Example: (no THREADID support)
C: 26 fetch 1:* (emailid threadid)
S: * 1 FETCH (EMAILID (M00000001) THREADID NIL)
S: * 2 FETCH (EMAILID (M00000002) THREADID NIL)
S: 26 OK Completed (0.000 sec)
6. New Filters on SEARCH Command
This document defines the filters EMAILID and THREADID on the SEARCH
command.
Syntax: "EMAILID" SP objectid
Messages whose EMAILID is exactly the specified ObjectID.
Syntax: "THREADID" SP objectid
Messages whose THREADID is exactly the specified ObjectID.
Example: (as if run before the MOVE shown above when the mailbox had
three messages)
C: 27 search emailid M6d99ac3275bb4e
S: * SEARCH 1
S: 27 OK Completed (1 msgs in 0.000 secs)
C: 28 search threadid T64b478a75b7ea9
S: * SEARCH 1 2
S: 28 OK Completed (2 msgs in 0.000 secs)
7. Formal Syntax
The following syntax specification uses the Augmented Backus-Naur
Form (ABNF) [RFC 5234] notation. Elements not defined here can be
found in the formal syntax of the ABNF [RFC 5234], IMAP [RFC 3501], and
IMAP ABNF extensions [RFC 4466] specifications.
Except as noted otherwise, all alphabetic characters are case
insensitive. The use of uppercase or lowercase characters to define
token strings is for editorial clarity only. Implementations MUST
accept these strings in a case-insensitive fashion.
Please note specifically that ObjectID values are case sensitive.
Gondwana Standards Track [Page 9]
RFC 8474 IMAP ObjectID September 2018
capability =/ "OBJECTID"
fetch-att =/ "EMAILID" / "THREADID"
fetch-emailid-resp = "EMAILID" SP "(" objectid ")"
; follows tagged-ext production from [RFC 4466]
fetch-threadid-resp = "THREADID" SP ( "(" objectid ")" / nil )
; follows tagged-ext production from [RFC 4466]
msg-att-static =/ fetch-emailid-resp / fetch-threadid-resp
objectid = 1*255(ALPHA / DIGIT / "_" / "-")
; characters in object identifiers are case
; significant
resp-text-code =/ "MAILBOXID" SP "(" objectid ")"
; incorporated before the expansion rule of
; atom [SP 1*<any TEXT-CHAR except "]">]
; that appears in [RFC 3501]
search-key =/ "EMAILID" SP objectid / "THREADID" SP objectid
status-att =/ "MAILBOXID"
status-att-val =/ "MAILBOXID" SP "(" objectid ")"
; follows tagged-ext production from [RFC 4466]
8. Implementation Considerations
8.1. Assigning Object Identifiers
All ObjectID values are allocated by the server.
In the interest of reducing the possibilities of encoding mistakes,
ObjectIDs are restricted to a safe subset of possible byte values; in
order to allow clients to allocate storage, they are restricted in
length.
An ObjectID is a string of 1 to 255 characters from the following set
of 64 codepoints: a-z, A-Z, 0-9, _, -. These characters are safe to
use in almost any context (e.g., filesystems, URIs, IMAP atoms).
These are the same characters defined as base64url in [RFC 4648].
Gondwana Standards Track [Page 10]
RFC 8474 IMAP ObjectID September 2018
For maximum safety, servers should also follow defensive allocation
strategies to avoid creating risks where glob completion or data type
detection may be present (e.g., on filesystems or in spreadsheets).
In particular, it is wise to avoid:
o IDs starting with a dash
o IDs starting with digits
o IDs that contain only digits
o IDs that differ only by ASCII case (for example, A vs. a)
o the specific sequence of three characters NIL in any case (because
this sequence can be confused with the IMAP protocol expression of
the null value)
A good solution to these issues is to prefix every ID with a single
alphabetical character.
8.2. Interaction with Special Cases
The case of RENAME INBOX may need special handling because it has
special behavior, as defined in [RFC 3501], Section 6.3.5.
It is advisable (though not required) to have MAILBOXID be globally
unique, but it is only required to be unique within messages offered
to a single client login to a single server hostname. For example, a
proxy that aggregates multiple independent servers MUST NOT advertise
the OBJECTID capability unless it can guarantee that different
objects will never use the same identifiers, even if backend object
identifiers collide.
8.3. Client Usage
Servers that implement both RFC 6154 and this specification should
optimize their execution of commands like UID SEARCH OR EMAILID 1234
EMAILID 4321.
Clients can assume that searching the all-mail mailbox using OR/
EMAILID or OR/THREADID is a fast way to find messages again if some
other client has moved them out of the mailbox where they were
previously seen.
Clients that cache data offline should fetch the EMAILID of all new
messages to avoid redownloading already-cached message details.
Gondwana Standards Track [Page 11]
RFC 8474 IMAP ObjectID September 2018
Clients should fetch the MAILBOXID for any new mailboxes before
discarding cache data for any mailbox that is no longer present on
the server so that they can detect renames and avoid redownloading
data.
8.4. Advice to Client Implementers
In cases of server failure and disaster recovery, or misbehaving
servers, it is possible that a client will be sent invalid
information, e.g., identical ObjectIDs or ObjectIDs that have changed
where they MUST NOT change according to this document.
In a case where a client detects inconsistent ObjectID responses from
a server, it SHOULD fall back to relying on the guarantees of RFC
3501. For simplicity, a client MAY instead choose to discard its
entire cache and resync all state from the server.
Client authors protecting against server misbehavior MUST ensure that
their design cannot get into an infinite loop of discarding cache and
fetching the same data repeatedly without user interaction.
9. Future Considerations
This extension is intentionally defined to be compatible with the
data model in [JMAP-MAIL].
A future extension could be proposed to give a way to SELECT a
mailbox by MAILBOXID rather than name.
A future extension to [RFC 5228] could allow fileinto by MAILBOXID
rather than name.
An extension to allow fetching message content directly via EMAILID
and message listings by THREADID could be proposed.
10. IANA Considerations
IANA has added "OBJECTID" to the "IMAP Capabilities" registry located
at <https://www.iana.org/assignments/imap-capabilities> with a
reference to this document.
IANA has added "MAILBOXID" to the "IMAP Response Codes" registry
located at <https://www.iana.org/assignments/imap-response-codes>
with a reference to this document.
Gondwana Standards Track [Page 12]
RFC 8474 IMAP ObjectID September 2018
11. Security Considerations
It is strongly advised that servers generate ObjectIDs that are safe
to use as filesystem names and unlikely to be autodetected as
numbers. See implementation considerations.
If a digest is used for ID generation, it must have a collision-
resistant property, so server implementations are advised to monitor
current security research and choose secure digests. As the IDs are
generated by the server, it will be possible to migrate to a new hash
by just using the new algorithm when creating new IDs. This is
particularly true if a prefix is used on each ID, which can be
changed when the algorithm changes.
The use of a digest for ID generation may be used as proof that a
particular sequence of bytes was seen by the server. However, this
is only a risk if IDs are leaked to clients who don't have permission
to fetch the data directly. Servers that are expected to handle
highly sensitive data should consider this when choosing how to
create IDs.
See also the security considerations in [RFC 3501], Section 11.
12. References
12.1. Normative References
[RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC 2119, March 1997,
<https://www.rfc-editor.org/info/RFC 2119>.
[RFC 3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
4rev1", RFC 3501, DOI 10.17487/RFC 3501, March 2003,
<https://www.rfc-editor.org/info/RFC 3501>.
[RFC 4315] Crispin, M., "Internet Message Access Protocol (IMAP) -
UIDPLUS extension", RFC 4315, DOI 10.17487/RFC 4315,
December 2005, <https://www.rfc-editor.org/info/RFC 4315>.
[RFC 4466] Melnikov, A. and C. Daboo, "Collected Extensions to IMAP4
ABNF", RFC 4466, DOI 10.17487/RFC 4466, April 2006,
<https://www.rfc-editor.org/info/RFC 4466>.
[RFC 5228] Guenther, P., Ed. and T. Showalter, Ed., "Sieve: An Email
Filtering Language", RFC 5228, DOI 10.17487/RFC 5228,
January 2008, <https://www.rfc-editor.org/info/RFC 5228>.
Gondwana Standards Track [Page 13]
RFC 8474 IMAP ObjectID September 2018
[RFC 5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC 5234, January 2008,
<https://www.rfc-editor.org/info/RFC 5234>.
[RFC 5256] Crispin, M. and K. Murchison, "Internet Message Access
Protocol - SORT and THREAD Extensions", RFC 5256,
DOI 10.17487/RFC 5256, June 2008,
<https://www.rfc-editor.org/info/RFC 5256>.
[RFC 5819] Melnikov, A. and T. Sirainen, "IMAP4 Extension for
Returning STATUS Information in Extended LIST", RFC 5819,
DOI 10.17487/RFC 5819, March 2010,
<https://www.rfc-editor.org/info/RFC 5819>.
[RFC 6851] Gulbrandsen, A. and N. Freed, Ed., "Internet Message
Access Protocol (IMAP) - MOVE Extension", RFC 6851,
DOI 10.17487/RFC 6851, January 2013,
<https://www.rfc-editor.org/info/RFC 6851>.
[RFC 8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC 8174,
May 2017, <https://www.rfc-editor.org/info/RFC 8174>.
12.2. Informative References
[JMAP-MAIL]
Jenkins, N. and C. Newman, "JMAP for Mail", Work in
Progress, draft-ietf-jmap-mail-07, August 2018.
[RFC 4122] Leach, P., Mealling, M., and R. Salz, "A Universally
Unique IDentifier (UUID) URN Namespace", RFC 4122,
DOI 10.17487/RFC 4122, July 2005,
<https://www.rfc-editor.org/info/RFC 4122>.
[RFC 4648] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, DOI 10.17487/RFC 4648, October 2006,
<https://www.rfc-editor.org/info/RFC 4648>.
Gondwana Standards Track [Page 14]
RFC 8474 IMAP ObjectID September 2018
Appendix A. Ideas for Implementing Object Identifiers
Ideas for calculating MAILBOXID:
o Universally Unique Identifier (UUID) [RFC 4122]
o Server-assigned sequence number (guaranteed not to be reused)
Ideas for implementing EMAILID:
o Digest of message content (RFC 822 bytes) -- expensive unless
cached
o UUID [RFC 4122]
o Server-assigned sequence number (guaranteed not to be reused)
Ideas for implementing THREADID:
o Derive from EMAILID of first seen message in the thread.
o UUID [RFC 4122]
o Server-assigned sequence number (guaranteed not to be reused)
There is a need to index and look up reference/in-reply-to data at
message creation to efficiently find matching messages for threading.
Threading may be either across mailboxes or within each mailbox only.
The server has significant leeway here.
Acknowledgments
The author would like to thank the EXTRA working group at IETF for
feedback and advice -- in particular, Arnt Gulbrandsen, Brandon Long,
Chris Newman, and Josef Sipek.
This document drew inspiration from the Gmail X-GM-THRID and X-GM-
MSGID implementations as currently defined at
<https://developers.google.com/gmail/imap/imap-extensions>, as well
as the X-GUID implementation in the Dovecot server.
Gondwana Standards Track [Page 15]
RFC 8474 IMAP ObjectID September 2018
Author's Address
Bron Gondwana (editor)
FastMail
Level 2, 114 William St
Melbourne VIC 3000
Australia
Email: brong@fastmailteam.com
URI: https://www.fastmail.com
Gondwana Standards Track [Page 16]
RFC 8474 - úplné znění
Plné znění RFC 8474:
English version: RFC 8474